Description
PnP version comes pre-mounted into a custom-designed 2M headshell. The headshell is a standard SME-type mount.
The 2M Series of cartridges is designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound
The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.
The cartridge body used for the 2M Bronze is manufactured from a newly-developed Lexan DMX Piano Black, a revolutionary material which ensures high rigidity while eliminating unwanted resonances.
We have optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.
The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.
2M Headshell features:
- Universal mount fitting a wide range of tonearms. NB: on Technics models please use the auxiliary weight which is vital in this case.
- The headshell body is manufactured from a special compound used for Medical industry, ensures high rigidity while reducing unwanted vibration
- Elegant hi-tech design
- Length 52mm. Headshell with a 2M cartridge pre-mounted provides correct Baerwald alignment with Ortofon TA-110/210, likewise with the major part of tonearms with universal mount
- Weight 16,9g, weight with a 2M cartridge pre-mounted 23g
- Exclusive plug-and-play solution
Technical data
| Technical data 2M Bronze / 2M Bronze Verso | |
| Output voltage at 1000 Hz, 5cm/sec. | 5 mV |
| Channel balance at 1 kHz | 1 dB |
| Channel separation at 1 kHz | 26 dB |
| Channel separation at 15 kHz | 15 dB |
| Frequency range at – 3dB | 20-29.000 Hz |
| Frequency response | 20-20.000 + 2 / – 0 dB |
| Tracking ability at 315Hz at recommended tracking force | 80 µm |
| Compliance, dynamic, lateral | 22 µm/mN |
| Stylus type | Nude Fine Line |
| Stylus tip radius | r/R 8/40 µm |
| Tracking force range | 1,4-1,7g (14-17 mN) |
| Tracking force, recommended | 1,5 g (15 mN) |
| Tracking angle | 20° |
| Internal impedance, DC resistance | 1,2 kOhm |
| Internal inductance | 630 mH |
| Recommended load resistance | 47 kOhm |
| Recommended load capacitance | 150-300 pF |
| Cartridge colour, body/stylus | Black/Bronze |
| Cartridge weight | 7,2 g |
| Replacement stylus unit | 2M Bronze(interchangeable with 2M Black) |
| Stylus protection guard | 2M Bronze |
| How to replace M2,0 mm screws on 2M Bronze Verso | |
| Remove the stylus with the stylus protection guard from the cartridge body to avoid any damage to the diamondUsing Torx 8 key, unscrew the black screw from the Verso top plateRemove the top plate from the cartridge body by pulling the screws offRemove the two countersunk screws from the top plateInsert the two M2,0 mm screws in the top plateMount the top plate on the cartridge body. Hold the top plate with screw-threads hanging down and turn the cartridge body 180 degrees. Mount from aboveMount the black screw in the top plate and tighten with appropriate forceMount the cartridge on the tonearm using the enclosed toolMount the stylus with the stylus protection guard on the cartridge body |
Manufacturer site
- Ortofon
Reviews
There are no reviews yet.